Jamestown distributors tv: interlux perfection two part polyurethane howto part i. this video covers interlux perfection two part polyurethane.. In effect, the epoxy paint does the 'work' of sealing, water proofing, providing chemical protection, providing a good bond and a thick layer, while the non epoxy paint top coat provides the look and gloss desired. epoxy paint products provide corrosion protection by acting as a physical barrier between the metal and oxygen in the air.. Some two-part polyurethanes lift oil-based paints, so check for compatibility with the paint that’s now on your boat. we tend not to recommend this to recreational boaters; manufacturers recommend application by professionals only..
Determining the paint system you are going to use on your boat, really comes down to considering these factors: time, effort, and budget. one-part paints traditional one-part paint (or alkyd enamel) can be applied ‘straight from the can’.. Deck paint i just put down a 2 part epoxy paint on a concrete floor.rustoleum high build epoxy. about $160.00 a gallon which covers 100sq.ft. no serious prep required.you do need 60 degrees i think. stuff is dry in 24 hrs full cure in 48 hrs. had about 2 inches left that cured in the can. i hit that hard with a 16 oz. hammer and a cold chisel.. The 2-part paint is very durable against abrasion; the system is relatively easy to apply even for beginners (if you closely follow the instructions) the paint is of high quality and the producer, akzo nobel has over a century of experience with boat paints.
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.